Position: Entry Level Helper  

Availability: ASAP 

Location: South Houston  

Experience: 1-month Low Voltage Helper, 3 months’ Construction labor  

Projects: Commercial buildings, medical clinics, K-12 schools 

Skills: Candidate can read and interpret blueprints, install support structures, pull CAT6 cable to final location according to prints, and terminate RJ45’s. He has experience gathering and distributing materials through job site, he can assist with measuring and cutting materials, assisted with installation of structural beams and sheet metal exterior walls and maintained work area clean and organized. Candidate has experience working with basic hand and power tools such as drills, grinders, squares, and tape measures. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards. 

Comments: Candidate is available to work any shift and is open to travel. 

Position: Low Voltage Helper   

Availability: ASAP 

Location: South Houston  

Experience: 3 months’ Construction labor  

Projects: Residential homes 

Skills: Candidate has experience gathering and distributing materials through job site, he can assist with measuring and cutting materials, assisted with drywall installation, assisted with interior and exterior painting, and maintained work area clean and organized. Candidate has experience working with basic hand and power tools such as drills, squares, and tape measures. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards. 

Comments: Candidate is available to work any shift and is open to travel. 

Position: Access Control & Network Service Technician 

Availability: ASAP 

Location: Porter, TX 

Experience: 2 years of experience installing, providing service repairs on access control, voice data copper and fiber infrastructure.  

Projects: Prisons all over Texas for the Texas Department of Criminal Justice. 

Skills: Candidate can coordinate with prion staff on safety protocols, review prints, walk job site to confirm scope of work. He can lead helpers, run wires, install mag locks, cut in door strikes on metal doors and wire IP based Honeywell access control panels. He utilizes Orion software to build scripts and dump codes for security data management. He can set up users badging settings, input devices and test systems. He can run data lines, splice fiber optic cables and test. Candidate can trouble shoot, repair, and maintain, access control, video surveillance and network cabling. He has trouble shot and replaced damaged hardware, power supplies, and devices. He can trouble shoot Adtran Ai managed network for secure coded, & captioned prison LAN lines, he replaced routers and network switches. He can complete new installations, upgrades, and conduct training classes for clients on operating access control systems with up to 40 staff/ end users in attendance.  

Credentials: TWIC 

Comments: Candidate has strong communication skills to work in a customer facing role, he has also performed installations and is flexible with responsibilities. He is open to local or travel work on any shift, on any day, including OT hours, and “on call” schedules.   

Job Title: Cabling Technician

Availability: Immediate

Location: San Marcos

Experience: Approximately 8 years of combined experience in residential, commercial, and fiber optic cabling. This includes 2 years of installing internet equipment, FPC, and splicing fiber, over a year as a fiber splicer, and 4 years as a service technician performing installations.

Projects: Fiber splicing projects, including high-volume splicing; internet equipment installation; fiber rerouting and labeling; pre-terminated fiber handling; patch panels setup.

Skills: Fiber splicing and troubleshooting, Cat5/Cat6 cable pulling, RJ-45 termination (crimp style and punch down), Coax and BNC connectors, patch panel setup, 66-block termination, fiber termination, blueprint reading, basic experience with security systems and cameras.

Comments: This candidate has a strong background in both residential and commercial fiber work, with hands-on experience in a variety of cabling and installation tasks. He is equipped with his own tools, which includes a fiber splicer, enabling him to be ready for immediate assignments.

Job Title: Entry-Level Helper

Availability: Immediately

Location: Georgetown

Experience: Experience in hands-on roles, including restaurant operations, maintenance, and landscaping work, with exposure to wiring, pump installation, and equipment repair.

Projects: Installed pumps, ran wiring, maintained restaurant equipment, performed vehicle maintenance, completed landscaping and fountain construction.

Skills: Equipment maintenance, basic electrical wiring, pump installation, landscaping, vehicle part replacement, material handling, and troubleshooting.

Credentials: TDLR- completed our entry level training class covering essential skills such as pulling cables, terminating jacks, and construction safety.

Comments: The candidate is highly motivated to transition into technical trades and brings relevant hands-on experience, mechanical aptitude, and familiarity with the industry through personal and family connections. Equipped with tools and eager to develop skills further in a structured technical role.

Job Title: Entry-Level Helper
Availability: require notice period 
Location: Georgetown
Experience: Over a year as a Lube Technician performing preventive maintenance on vehicles, and additional experience in gig economy roles such as delivery services.
Projects: Preventive maintenance on vehicles, oil changes, tire replacements, tire rotations, fluid exchanges.
Skills: Basic mechanical skills, familiarity with tools and equipment, vehicle maintenance procedures, ability to follow structured processes, safety compliance knowledge.
Credentials: OSHA 10 certification, completed our entry level training class covering essential skills such as pulling cables, terminating jacks, and construction safety.
Comments: Motivated to transition into the construction field with opportunities to learn and grow. Shows adaptability and work ethic demonstrated across varied roles.

Job Title: Entry-Level Helper 
Availability: Immediate 
Location: Elgin TX 

Experience: 
This candidate has entry-level experience in construction and basic electrical work. He has worked on custom cabinetry installation and has performed tasks like trench digging, running wires through pipes and ceilings, and installing outlet boxes. 

Projects: 
Custom cabinetry building and installation, trench digging for electrical wiring, running electrical wiring in residential settings, installing outlet boxes. 

Skills: 
Basic electrical wiring, trench digging, conduit installation, cabinet installation, use of power tools. 

Comments: 
He brings hands-on experience from working in construction and electrical tasks and is ready to start immediately at an entry-level position. The candidate has attended a training class covering essential skills such as pulling cables, terminating jacks, and construction safety. 

Job Title: Entry-Level Electrical Helper 
Availability: Immediately 
Location: Elgin, TX 

Experience: Over a year of hands-on experience in warehouse and construction settings. Most recently employed as a laborer at a warehouse, where he gained experience with inventory handling, organization, and physical labor. Additionally, he has two years of experience assisting in residential construction, working alongside his father on tasks such as general labor support, material preparation, and site cleanup. In early 2023, he worked in Mexico installing residential lighting fixtures and electrical appliances, developing foundational skills in basic electrical work. 

Projects: Residential light installation, appliance installation for residential settings, general labor and material handling in warehouse and construction environments 

Skills: Basic electrical and lighting installation, appliance setup, material handling, familiarity with construction site protocols, willingness to learn 

Comments: The candidate has attended a training class covering essential skills such as pulling cables, terminating jacks 

Job Title: Entry Level Installer 
Availability: ASAP 
Location: San Antonio, TX - Southeast 

Experience: This candidate has approximately 2 years of experience in general labor, vehicle maintenance, and customer service roles. They have experience in vehicle detailing, basic automotive repairs, tire changes, oil changes, minor repairs, removing parts, replacing parts, social media management, and landscaping. This candidate has attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices as well as construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70. 
Projects:  

Skills: Worked with hand tools and power tools 

Credentials: 

Comments: This candidate is looking to transition into a long-term career and is eager to develop new skills. Open to all positions, open to all shifts, open to OT & weekends, no issues with heights, no problems with commuting to jobsite, and has tools but would need to acquire more. 

Job Title: Entry Level Installer  
Availability: ASAP  
Pay Rate: $17  
Bill Rate:   
Location: San Antonio  

Experience: This candidate has 4 years of experience as a flooring installer, skilled in installing various types of flooring, including vinyl, ceramic tile, and carpeting. Their expertise encompasses all aspects of flooring installation, such as trimming, demolition, leveling, measuring, cutting, arranging, applying, nailing, and using sealants. They also have experience in quality assurance and post-installation cleaning. This candidate attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices and construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70.      
Projects:   

Skills: Proficient in flooring installation, carpeting, and precise measuring. 

Credentials:  

Comments: This candidate is open to all shifts, including overtime and weekends, has reliable transportation, is willing to travel, and has basic tools to start with the ability to acquire additional tools as needed. 

Job Title: Entry Level Installer 
Availability: ASAP 
Location: San Antonio 
Experience: This candidate has over 8 years of hands-on experience in warehouse operations and logistics. Candidate has extensive experience in operating forklifts, electric pallet jacks, loading and unloading freight, managing warehouse inventory, labeling containers, following safety procedures, and performing maintenance on equipment such as forklifts and pallet jacks. This candidate was also responsible for ensuring accuracy in weight and height measurements for shipping, maintaining activity logs, identifying damages. This candidate has attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices as well as construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70. 
Projects: Warehouse logistics, forklift operation, inventory management, 
Skills: Hand tools, power tools, forklift operation, electric pallet jack handling,  
Credentials: TDLR Electrical Apprentice  
Comments: Open to all shifts, open to OT & weekends, reliable transportation, open to travel, has some tools can get the rest. 

Job Title: Entry Level Installer 
Availability: ASAP 
  
Location: San Antonio 

Experience: This candidate has 3 years of experience as an Installer, specializing in the installation of neon signs, vinyl signs, refrigerators, stoves, windows, doors, and frames. Proficient in the use of power tools, they have handled tasks such as loading/unloading, repairs, wiring, measurements, transportation, routine maintenance, caulking, painting, priming, demolition, and installing electrical outlets and fans. This candidate attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices and construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70.     
Projects:  

Skills: Candidate is skilled in using hand tools, power tools, painting, priming, and caulking. 

Credentials: 

Comments: This candidate is flexible with shift availability, open to overtime and weekends, has reliable transportation, is willing to travel, and has basic tools with the ability to acquire more as needed. 

Job Title: Entry Level Installer  

Availability: ASAP 

Location:  San Antonio - Westside 

Experience: The candidate has experience in manufacturing and customer service roles. He has worked in automotive production, where he operated injection molding machines, performed trimming, and conducted final inspections. Additionally, he has experience in loading and unloading shipments, managing inventory, and packaging parts for shipment. In the customer service sector, he has provided debt relief support in a call center environment. His recent work includes general labor on a farm, performing tasks like fencing, painting, landscaping, and light construction. This candidate attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices and construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70. 

Projects: Manufacturing  

Skills: Worked with hand tools and power tools 

Credentials:  

Comments: The candidate is highly motivated to pursue a skilled trade and is eager to transition into a career in the low voltage field. He has reliable transportation, can work all shifts, open to OT & weekend work, open to travel work, no issues with commuting to jobsite, no problem with heights, and has tools but can get the rest that would be needed.  

Job Title: Entry Level Installer 
Availability: ASAP 
 
Location: San Antonio, TX - Northside 

Experience: This candidate has security experience spanning over 3 years, including patrolling and reporting duties, as well as over 2 years of experience in customer service and warehousing roles. Security patrols, customer service roles, warehouse inventory management, call center operations, framing, tile work, painting, fixture installations, conduit bending, relay and switch installation, blueprint/schematic reading, basic construction. They have recently started pursuing an electrical technician path and have acquired fundamental skills in this trade. This candidate attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices and construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70. 

Projects: 
Skills: Worked with hand tools and power tools 

Credentials: OSHA 10, TDLR, Electrical Technician Certification (in progress at Southern Careers Institute). 

Comments: This candidate is highly motivated to transition into the electrical trade, with relevant hands-on experience and training. They are open to all positions, working overtime,

Job Title: Entry Level Installer 
Availability: ASAP 

Location: San Antonio 

Experience: This candidate brings experience in painting and warehousing, including tasks such as painting, priming, coating, prepping, tape lining, caulking, crack and hole repair, and cleaning. In warehousing, he has experience with order picking, pallet jack operation, forklift use, loading/unloading, scanning, wrapping, and following safety protocols. This candidate attended our eight-hour training class designed to introduce voice/data and fire alarm system installation and best practices and construction site safety. Classes are based on TIA/EIA standards, NEC, and NFPA 70.     
Projects:  

Skills: Proficient with hand tools, painting, priming, and forklift operation. 

Credentials: 

Comments: This candidate is flexible with shift availability, open to overtime and weekends, has reliable transportation, is willing to travel, and has basic tools with the ability to acquire more as needed. 

Job Title: Fiber Optic Technician

Availability: Immediate

Location: Austin, TX

Experience: 2 years of experience as a fiber optic technician, working on both commercial and residential projects. Most recently worked at Optical Technology on fiber optic installations before the company relocated to Florida. Previous experience at MyTech focused on residential projects across the U.S. Expertise includes running, splicing, terminating, and testing fiber optic cables, with experience using a Fusion splicer, including Fujikura.

Projects: Google Fiber, AT&T, The Travis in Downtown Austin, apartment complexes, Vexus, POE splicing, OTDR testing.

Skills: Fiber optic splicing (Fusion and mechanical), fiber termination, fiber testing, OTDR testing, POE splicing, low voltage installations, project management, equipment handling.

Credentials: High School Diploma

Comments: Seeking local work to remain in Texas with family. While primarily Spanish-speaking, he possesses an understanding of English, allowing for effective communication on-site.Equipped with personal tools, including a well-used Fujikura Fusion splicer, with plans to acquire a new one soon. Ready to start immediately and committed to delivering high-quality, functional results on all fiber optic projects.  

Job Title: Fire Alarm Technician / Fiber Optic Technician
Availability: Immediate
Location: Georgetown, TX
Experience: 3 years of experience in fire alarm systems, including installation and maintenance of panels, alarms, detectors, and related systems. 3 years of experience in fiber optics, specializing in running wire, splicing, terminations, and testing.
Projects: Mayo Clinic Hospital & Research Center, Banner Boswell Hospital, Banner Desert Medical Center, Iron Mountain Data Centers, Phoenix High Rises, JW Marriott Phoenix Desert Ridge Resort & Spa, Lucid Motors, various group homes, small businesses, multi-family homes
Skills: Fire alarm system installation (Horns, strobes, smoke detectors, pull stations), DAS systems, fiber optic splicing and termination, fusion splicing, Fluke testing, commercial and residential wiring
Credentials: OSHA 10 Certification
Comments: The candidate has extensive hands-on experience in both fire alarm systems and fiber optics, with a history of working on high-profile commercial projects and residential installations. He has familiarity with well-known systems like Potter and Honeywell and aims to further his qualifications by obtaining a Fire Alarm License. His technical expertise and readiness to work make him a valuable asset in either fire alarm or fiber optic roles.

Job Title: Fire Alarm Inspector 
Availability: Immediate 
Location: Buda- Austin 

Experience: 4 years of fire alarm inspection experience, with additional exposure to service and limited installation tasks. Previously worked in medical supply management and inventory control. 

Projects: Fire alarm inspections for office buildings, restaurants, gyms, grocery stores 

Skills: Fire alarm inspection, service calls, minor installations, NFPA-72 compliance, device testing with tools such as smoke cups and heat guns, replacing strobes, smoke detectors, and pull stations, wiring, scissor lift operation, familiarity with Silent Knight, Honeywell, Bosch, Edwards, Firelite, Siemens 

Comments: Matthew is an experienced fire alarm inspector skilled in NFPA-72 compliance, device testing, and basic troubleshooting for fire alarm systems. He has inspected and maintained systems in a variety of commercial settings and demonstrates proficiency in testing and minor repair work. His recent move to the area has expanded his scope of skills to include service tasks and installations. He presents professionally and is ready to work immediately.

Job Title: Fire Alarm Installer

Availability: Immediate

Location: Austin

Experience:
One year of experience as a fire alarm installer, focusing on cable pulling, device installation, and blueprint reading.

Projects:
Smoke detectors, speaker strobes, horn strobes, pull stations, weatherproof devices

Skills:
Blueprint reading, cable pulling, device installation (smoke detectors, speaker strobes, horn strobes, pull stations), scissor lift and boom lift operation

Credentials:
OSHA 10, Scissor Lift Certification, Boom Lift Certification

Comments:
The candidate is certified in multiple areas and available for immediate start. With hands-on experience in fire alarm installations, he is ready to contribute to projects that require efficient and reliable fire alarm system setups.

Job Title: Fire Alarm Installer
Availability: Immediately
Location: Austin, Texas

Experience: One year of fire alarm experience, including installation, configuration, troubleshooting, and device trim-out, and several months of structured cabling experience.

Projects: Fire alarm installations and configurations in commercial settings, troubleshooting faulty alarm systems, routine inspections and testing, wiring and trim-out for fire alarms including heat detectors, smoke detectors, duct detectors, strobes, and switch modules, testing with a multimeter; structured cabling installation including CAT 5, CAT 5e, CAT 6, and CAT 6a terminations, cable dressing, testing, and troubleshooting.

Skills: Fire alarm installation, troubleshooting, system testing, compliance with fire codes, wiring and device trim-out (heat detectors, smoke detectors, ducts, strobes, switch modules), multimeter testing; structured cabling, cable termination, cable testing, outlet construction, ladder and lift operations.

Credentials: OSHA 10.

Comments: This candidate demonstrates proficiency in fire alarm systems and structured cabling, with hands-on experience in diverse environments. They are skilled in device installation, troubleshooting, and safety compliance, and are comfortable working in challenging conditions with a strong attention to detail.

Job Title: Fire Alarm Entry Level  

Availability: Immediately 

Location: Georgetown,  

Experience: Two months of experience in fire alarm installations. As well as several years of experience in residential construction, including demolition, electrical work, outlet and switch installation, and water heater installation. 

Projects: Fire alarm installations including strobes, speaker strobes, pull stations, horns, tamper switches. House demolitions, electrical installations (outlets, switches), water heater installations, cable running through 2x4's, sheetrock replacement, flooring replacement,  

Skills: Fire alarm device trim-out, wire pulling, working with fire alarm systems including Simplex, Honeywell, Notifier, Silent Knight, Potter, Bosch. Demolition, electrical installations, switch and outlet installation, cable running, sheetrock replacement, flooring replacement, water heater installation, 

Credentials: Completed low voltage cabling training, construction safety training. 

Comments: This candidate is eager to transition further into the Fire Alarm trade. They bring a strong background in residential construction and a developing skill set in fire alarm. systems, including device installation and wiring, with experience working with leading industry brands. 

Job Title: Entry-Level Fire Alarm Helper
Availability: Immediate
Location: Pfuguerville, TX

Experience: Five months of experience running wire and installing fire alarm devices in commercial new construction. Additional experience includes a few months of gas piping in a construction setting, one year of landscaping as a contractor, and one year of residential painting.

Projects: Fire alarm wiring and device installation in commercial buildings, gas piping in construction projects, landscaping for residential and commercial properties, residential painting.

Skills: wire, installing fire alarm devices, basic gas piping, general construction support, landscaping, residential painting.

Credentials: Steel-toed boots; willing to acquire tools if needed.

Comments: Candidate has foundational skills in fire alarm installations and general construction tasks. Demonstrates a strong work ethic and adaptability to various roles in commercial and residential settings.

Job Title: Fire Alarm Installation Helper

Availability: Ready to start immediately

Location: Austin, TX

Experience: Four months in fire alarm installation, two years in residential remodeling, one year in warehouse operations for home remodeling.

Projects: Fire alarm installation including wiring, troubleshooting, and device setup in various Schools; Residential remodeling including framing, carpentry, and window installations; Warehouse support for remodeling materials

Skills: Fire alarm installation basics, wire running, device trimming, basic troubleshooting, framing, carpentry, use of hand and power tools, forklift, and boom lift operation

Credentials: Forklift certification, Boom lift certification

Comments: This candidate is highly motivated to expand his skills in the fire alarm trade. He has comprehensive hands-on experience with construction tools, installation equipment, and safety gear and is fully equipped with personal tools, PPE, and steel-toed boots. His background in remodeling and recent fire alarm training positions him well for roles that require adaptability and technical growth in installation.

Position: Lead Service Access Control Technician

Availability: ASAP

Location: Houston, TX

Experience: Over 15 years of experience in security systems installation, troubleshooting, maintenance, and low-voltage cabling across various commercial and industrial settings. 

Projects: Security and CCTV installation for health care facilities, retail locations, large commercial businesses, data cabling installation for office buildings, IP camera setup for manufacturing plants, access control systems for corporate offices, security and surveillance systems for distribution centers. 

Skills: Access Control Lead Technician with over 15 years of experience in installation and service. He has worked as a lead with over 15 technicians, reading prints and running security installations in schools and hospitals and the largest project was in a data center. He can prewire polling loops, install POPPITS, maglocks, door strikes, crash bars, card readers, security alarm devices and wire and program Bosch, Lennel, Access Insight, Open Option, and A Mag alarm panel. He also installed all cabling equipment for Axis IP cameras and IP configured NVRs. Technician has worked as an on site service technician at a facilities, trouble shooting and documenting trouble calls. He coordinated remotely on access door service add ons in south Texas with sub-contractors to schedule technicians, line out scope of work and take care of permits and administrative documentation. Prior experience was installing and terminating voice data structured cabling. Candidate is looking for a long-term position in the security field 

Credentials: Security license, AccessNsite certification, Alarm Installer License, OSHA10 

Comments: The candidate is a dedicated and knowledgeable technician with extensive experience in managing and executing complex security systems projects. He brings proven leadership skills, effectively managing crews on multiple installations, and completing projects across the security and surveillance industry. 

Name: Matthew Villarreal - 249541 / Candidate  

Job Title: Level I Access Control Technician  
Availability: ASAP  
Location: San Antonio  

Experience: This candidate is an experienced low-voltage installation technician with over five years of expertise in both commercial and residential projects. His skillset includes the installation, maintenance, and troubleshooting of security alarm systems, access control systems, and fire alarm systems. Candidate is proficient in camera installations, smoke detectors, glass breaks, motion detectors, theater systems, volume controls, vacuum systems, and cable installations (Cat 5e, 18/2, 224, 16/2, 16/4). He has a solid background in working with fire alarm devices, door strikes, mag locks, card readers, and blueprint reading. 

Projects: Commercial and residential installations. 
Skills: Proficient using hand and power tools. 

Credentials:  

Comments: This candidate is open to all shifts, overtime, weekend work, possesses reliable transportation, no issues with heights, no problem commuting to jobsites, and equipped with tools. 

Job Title: Level I Structured Cabling Technician   

Availability: ASAP   

Location: San Antonio   

Experience: This candidate has three years of experience in the low-voltage trade, specializing in cable pulling (Cat 6, 144 & 184 strands), fiber splicing, RJ45 terminations, rack assembly, cable dressing and labeling, and installing support structures. Their expertise also includes performing punch-downs, conducting Fluke testing, adhering to safety protocols, maintaining equipment, and operating lifts (both scissor and boom). 

Projects: Microsoft data centers 
Skills: Proficient use of hand and power tools.  

Credentials: OSHA 10 certification 

Comments: This candidate is motivated to build a long-term career in the low voltage industry. They are open to all shifts, including weekends and overtime, no travel for now, and have no issues with heights or commuting to job sites. Their military background highlights strong discipline, problem-solving, and team collaboration. 

Job Title: Licensed Apprentice Electrician

Availability: Immediate

Location: Jersey Village, TX 77066

Experience: Two years of experience in Commercial Construction along with Two years of electrical controls installations in Commercial Environments. Experience completing remodels, Underground, and New Construction

Projects: Schools, Restaurants, Court House, AT&T Stores, Dormitories, 40 Story Office Building

Skills: Experience in terminating VFDs, and controllers for fan power boxes. Heavy experience Installing and running ¾ in EMT performing 90s, 45s, offsets, 3 - point saddles 4 – point saddles. Handled communication wiring size 16’18’24’. Exposure to mechanical, plumbing, and electrical blueprints. Pulled wire to underground to Transformers. Installed lights, outlets, CAT 5 wiring for data. Assisted in panel installations. Experience in Boom Lift, Scissor Lift, and Forklift.

Credentials: Technical degree in progress, anticipated completion in 2024.

Comments: Candidate demonstrates a strong foundation in electrical. The candidate is looking forward to strengthening his commercial construction experience and is equipped with PPE and is ready to start immediately.

Job Title: Licensed Apprentice Electrician

Availability: ASAP

Location: Houston, TX 77008

Experience: Over four years of commercial electrical experience, including work in new construction, remodels, buildouts, and more.

Projects: Data centers, Bush Airport, hi-rises, office and lease spaces, distribution centers, warehouses, a Chase bank.

Skills: Installing EMT conduit for PA systems, data, lighting, and home runs; pulling wire and MC cable; installing receptacles, boxes, switches, light fixtures, floor devices; running homeruns; troubleshooting and reading blueprints; bending conduit; applying craft-related math; utilizing test equipment.

Credentials:NCCER Core, Electrical Level 1 and Level 2 certifications; NCCER Industrial Electrician Knowledge Verified at Journeyman Level Assistant; Electrician Apprentice License (#455057); 480 contact hours of industrial safety, technical, and employability training.

Comments: A dedicated electrician with a proven ability to complete projects with minimal supervision, possessing comprehensive hands-on experience in both basic and advanced electrical work. Highly adaptable to various construction environments and requirements.

Job Title: Licensed Apprentice Electrician

Availability: ASAP

Location: Spring, TX 77386

Experience: One year of commercial remodels and service work, 4 months of Electrical Trade School, additionally residential experience on new construction and occupied homes

Projects: Texas prisons, warehouses, offices, lease spaces, hospitals, residential homes

Skills: Proficient installing ½in. to 2 ½in EMT performing bends such as 90s, offsets, 3-point saddle, and 4-point saddle. Has experience using a hydraulic bender for EMT performing offsets, 90s, and kicks. Assisted In installing and repairing panels, troubleshooting residential panels, installed breakers for panels. Installed disconnects to generators and panels. Experience reading basic electrical blueprints. Installed Generac generators with no assistance. Worked with Voltmeter, multi meter, and plug tester. Installed ballasts, recess lighting, 2x4s, outlets, switches and plugs. Experience pulling in for the main power and running wire to transformers from 200 to 800AMP service

Credentials: National Technical Institute Electrical Training Certification, Forklift Certification.

Comments: The candidate is extremely knowledgeable in the electrical field and has 0 issues verbalizing electrical experience in detail. The candidate is analytical and a problem solver who is ready to take on any tasks in the field while completing them in a timely manner while ensuring quality and safety. The candidate can start as soon as possible.

Job Title: Licensed Apprentice Electrician

Availability: ASAP

Location: Cypress, TX 77095

Experience: Five months of commercial new construction and remodels. Four Months of Electrical Trade School

Projects: Deer Park warehouse, HEB distribution center, residential generator installations.

Skills: Experienced in installing ¼ in EMT performing 90s, offsets. Installations of Ceiling fans, single pole switches, receptacles, outlets, and light fixtures. Underground experience digging trenches installing 2in PVC Bending with a heat torch and bonding with Glue. Exposure to blueprints. Pulled wire into panels and breakers. Installed Generac generators with assistance. Experience on platform lift.

Credentials: Electrical Technician training at National Technical Institute

Comments: The candidate demonstrates a strong aptitude for hands-on roles, recently transitioning into electrical work with a focus on growing in the trades. He is adaptable, has worked in diverse environments, and is eager to advance in the electrical field.

Position: Low Voltage Helper  

Availability: ASAP 

Location: North Houston  

Experience: 1 month experience as a low voltage helper, 11 months’ experience in event setup, serving at banquets, event cleanup. 

Projects: Clinics, K-12 schools, Commercial buildings 

Skills: Candidate has basic understanding of blueprints; he can pull wire to designated locations according to blueprints and terminate RJ45’s and can-do basic conduit bends. He has experience working as a part-time banquet hall server and laborer, handling setup and takedown, serving food and drinks, customer service, and working with his team to ensure event operations went smoothly. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards. 

Credentials: High school diploma  

Comments: Candidate is available to work any shift and is open to travel 

Job Title: Entry Level Helper
Availability: Immediate
Location: Cedar Park

Experience: This candidate has experience in various general labor roles, including warehouse operations, maintenance tasks, satellite installations, welding, and coal mining. He is familiar with the use of both hand tools and power tools. He's worked with us and completed tasks like cable pulling, wire termination, labeling, and general site preparation, while learning the fundamentals of structured cabling practices and network infrastructure installation, as well as Fire alarms.

Projects: Warehouse labor, maintenance tasks, satellite installation support, welding assistance, coal mining operations

Skills: Hand tools, power tools, basic labor safety knowledge, Entry level Fire Alarm & Voice and Data skills, physical stamina, problem-solving in labor-intensive settings

Credentials: OSHA 10

Comments: This candidate’s diverse general labor background and immediate availability make him well-suited for entry-level roles in environments requiring the use of tools and adherence to safety protocols. He is eager and ready to contribute to projects right away.

Position: Low Voltage Helper  

Availability: ASAP  

Location: South Houston  

Experience: Four months of experience in commercial low voltage installation of voice data structured cabling, Emergency AOR systems and intercoms. He has experience in Technical Training and college mock projects, five months of roofing construction experience. 

Projects: Exxon Mobile Campus building, Bush Airport, Friendswood High School, 13K’ of network cabling in new construction of 1st Credit Union, new office buildings, Residential homes under construction or remodel and Alief Community Center.  

Skills: Most recently he worked in renovation projects demoing old cabling and fiber, he ran cabling for DAS and AP’s, he terminated jacks and installed AP’s. Prior to that he worked in a new construction project, installing j-hooks, ran jet line and pulled CAT5e cabling over the ceiling and across I-beams and dressed cables. Candidate worked with a four-man crew running wires through conduit and installing emergency push buttons for AOR- Areas of Refuge Communications systems to contact first responders. He has also ran speaker wires and installed intercom speakers. He has successfully completed a Trade School program where he was trained on hands on skills running MC Cable in commercial and Romex wires in residential settings. He wired step down transformers, lighting, and receptacles. He also learned fundamentals of HVAC systems, he wired capacitors, and fan motors. He learned to make basic bends on conduit and basic NEC. In addition, our Entry Level Technical Training Class covering BISCI cabling standards, construction safety and wire pulling techniques.  

Credentials: Apprentice Electrician’s License, Electrical Application Diploma -2024.  

Comments: Candidate has a great attitude; he can work day shifts on local jobs. 

Position: Low Voltage Helper  

Availability: ASAP 

Location: North Houston  

Experience: 1 month experience as a Low Voltage Helper, 8 months Shipping and receiving, 3 months computer device repair. 

Projects: Commercial buildings, medical clinics, K-12 schools 

Skills: Candidate can read and interpret blueprints, install support structures, pull CAT6 cabling to designated location according to prints, terminate RJ45’s and can-do basic conduit bends. He has experience loading and loading packages onto and off trucks, used handheld scanner to scan and organize incoming and outgoing packages and properly store them in designated areas. Candidates have experience diagnosing hardware and software issues on Lenovo Chromebook’s. He can perform hardware repairs including screen replacement, keyboard repairs, battery replacement, and ensuring all software is current and up to date. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards. 

Credentials: Bachelor of Science in Electrical Engineering 

Comments: Candidate is available to work any shift and is open to travel. 

Position: Low Voltage Helper  

Availability: 2 Week Notice    

Location: Pearland, TX  

Experience: 1 ½ years of experience in residential construction and renovations.  

Projects: Residential homes.  

Skills: Candidate can pull wires through attics and wire lighting. He can run PEX lines and assist with connections, use drills to install drywall and trim. He has used jackhammers and Sawzalls to break concrete and cut lumber for demolition projects. He has worked on a frame and 40ft extension ladders to install hurricane screens on windows. He has recently completed our low voltage training class construction safety, wire pulling techniques, BICSI cabling standards and color codes. He received hands on training punching down modular data jacks, crimping RJ45 connectors, and performing connectivity tests with a 4-pair tester. Candidate also wired smoke detectors, pull stations and siren/strobes on fire alarm (SLC & NAC) circuits, and was trained in basic metering and testing.   

Credentials: TWIC  

Comments: Candidate can work any shift, day or night, OT hours and open to travel work. 

Position: Low Voltage Helper 

Availability: ASAP 

Location: North Houton 

Experience: Over a year of experience in outdoor traffic signal lighting installation, service upgrades and maintenance. 

Projects: Outdoor projects in school zones and street intersections. 

Skills: Candidate worked with a crew installing traffic signal lights, he can probe underground utilities, dig 6’ holes and install utility poles. He ran PVC pipe, installed junction boxes, and ran electrical and low voltage wires with fish tape from controls cabinets to lighting and equipment. He can mount equipment with U-bolts/astro brackets; install school zone flashers, and solar panels. He used a boom lift and bucket truck to install outdoor illumination streetlights, traffic signals, pedestrian indicator lights, cross walk push buttons and CCTV cameras. He has assisted the service team with replacing faulty equipment, demoing existing and replacing upgraded new hardware. Previous experience was working with a team of carpenters on installation of hardwood flooring and outdoor fences.  

Credentials: Forklift certified, Apprentice Electrician License. 

Comments: Candidate is Bilingual fluent in English & Spanish; he is eager to learn. He can work local, open to any shift, weekends, and OT hours. 

Position: Low Voltage Helper 

Availability: ASAP 

Location: Porter, TX 

Experience: Right after High School, candidate served in the US Army for three years. In addition, he completed three programs in trade school for electrical, HVAC, and plumbing. 

Projects: Trade school mock hands-on projects. 

Skills: Candidate completed trade school theory and hands on training in electrical, where he read wiring diagrams, trouble shoot circuits in residential settings, connected service from power lines, wired receptacles, lighting and utilized a receptacle tester and multi meter to trouble shoot. He also received training on trouble shooting and replacing HVAC and water heater components. As well as plumbing, he installed water fixtures, solder copper pipe, cut, thread pipe and diagnose issues for repairs. He was a Team Lead in the US Army and received training on operating howitzer, marksmanship, weapons, and vehicle maintenance. Recently candidate completed our low voltage training class construction safety, wire pulling techniques, BICSI cabling standards and color codes. He received hands on training punching down modular data jacks, crimping RJ45 connectors, and performing connectivity tests with a 4-pair tester. Candidate also wired smoke detectors, pull stations and siren/strobes on fire alarm (SLC & NAC) circuits, and was trained in basic metering and testing.    

Credentials: Technical Trade Training in Electrical, HVAC, and Plumbing.  

Comments: Candidate is very respectful; he is honored to have served in the military and is now seeking a skilled trade in the private sector. He can work local jobs on the day shift, he is available to stay late for OT hours and work occasional weekends as needed. 

Position: Low Voltage Helper 

Availability: ASAP 

Location: Conroe, TX 

Experience: Six months experience as a conveyor system maintenance technician and over three years as a residential carpenter. 

Projects: Residential homes and in the field maintenance in existing commercial warehouses. 

Skills: Candidate used drills/ impacts and wrenches to disassemble & reassemble sections of conveyor belt systems. He removed springs and conveyor components from turn tables, ball transfer tables and conveyors. He replaced locking latches, operating pedals, ball bearings; he routed wires through machines, connected and tested actuators and sensors. Prior experience was working in residential construction sites, he used saws and nail guns to perform trim and finish work on framing. Recently candidate completed our low voltage training class construction safety, wire pulling techniques, BICSI cabling standards and color codes. He received hands on training punching down modular data jacks, crimping RJ45 connectors, and performing connectivity tests with a 4-pair tester. Candidate also wired smoke detectors, pull stations and siren/strobes on fire alarm (SLC & NAC) circuits, and was trained in basic metering and testing.    

Comments: Candidate is dedicated to his work, he does not have any limitations, he can work any shift on any day. He is available for OT hours and travel work. 

Position: Low Voltage Helper 

Availability: ASAP 

Location: South Houston 

Experience: Five years’ experience as a machine operator, operating and performing general maintenance on plastic manufacturing and food packaging facilities.  

Skills: Candidate worked as a lead over 4 assembly lines, he trained new staff workers, operated machines on designated stations and used an impact drill to take apart and change out steel moldings and bolt on new ones for plastic manufacturing. He also worked in a rice packaging plant where he operated packaging machines. He uploaded settings for temperature and position of heating elements to seal packages. He loaded sacks of rice and moved them on conveyor belts and assisted the maintenance technician on basic machine maintenance. He has recently completed our low voltage training class construction safety, wire pulling techniques, BICSI cabling standards and color codes. He received hands on training punching down modular data jacks, crimping RJ45 connectors, and performing connectivity tests with a 4-pair tester. Candidate also wired smoke detectors, pull stations and siren/strobes on fire alarm (SLC & NAC) circuits, and was trained in basic metering and testing.     

Credentials: Pallet Jack Certification 

Comments: Candidate is flexible to stay late or come in early. He can work days, nights, weekends, OT hours and travel work. 

Position: Low Voltage Helper 

Availability: 1 Week Notice 

Location: Pearland, TX 

Experience: Six months of experience as a fabricator in a machine shop. He has also worked on several side jobs in residential electrical renovations.  

Projects: Residential homes. 

Skills: Candidate works in a fabrication shop utilizing PPE and safety procedures to operate CNC machines in a drilling fabrication shop. He Has also worked on side jobs for residential renovations and repairs, where he replaced ceiling fans, lighting, and receptacles.  He completed technical trade school courses covering NEC, electrical theory, OHM’s law, AC/DC applications, technical wiring and lock out/tag out safety procedures. He received hands on training on wiring electrical components, breaker panels, and bending ½’’ & ¾’’ EMT conduit. In addition, he has successful completed our Low Voltage Training Class instructing on construction safety, wire pulling techniques, BICSI cabling standards and color codes. He received hands on training punching down modular data jacks, crimping RJ45 connectors, and performing connectivity tests with a 4-pair tester. Candidate also wired smoke detectors, pull stations and siren/strobes on fire alarm (SLC & NAC) circuits, and was trained in basic metering and testing.    

Comments: Recent high school graduate, committed to starting a technical career. He is open to working any shift on any day, including OT hours and travel work. 

Position: Low Voltage Helper   

Availability: 2 Week Notice   

Location: Katy, TX   

Experience: Candidate has years of experience working with family on automotive repairs and outdoor build outs for family property. He has over three years of management experience. He managed the logistics and warehouse organization for crankshafts, pistons, and various automotive engine parts. Recently he has been managing sales, customer service, business schedules and employee tasks at a car wash, seeking to learn a trade and work with tools.   

Skills: Candidate can replace brake pads, batteries, perform oil changes and coolant flush. He has great organizational skills, able to learn workflows, manage and motivate teams and problem solving to create effective plans, overcome challenges with the job or people involved creating a focus on the goal. He has a history of success with mastering his title and earning promotions with more responsibility given to him with every employer he has worked with. He has recently completed our low voltage training class construction safety, wire pulling techniques, BICSI cabling standards and color codes. He received hands on training punching down modular data jacks, crimping RJ45 connectors, and performing connectivity tests with a 4-pair tester. Candidate also wired smoke detectors, pull stations and siren/strobes on fire alarm (SLC & NAC) circuits, and was trained in basic metering and testing.    

Credentials: TWIC   

Comments: Candidate is reliable, he has a mature and positive attitude. He can work local jobs on any shift, except for Saturday he is flexible on schedules and OT hours.   

Position: Low Voltage Helper   

Availability: ASAP    

Location: Channelview  

Experience: 6 months’ experience as a stagehand  

Projects: Commercial properties, hotels  

Skills: Candidate has experience setting up and tearing down temporary AV systems for live shows, presentations, and events. He pulls the wiring needed for the desired set up, safely secures the wire and sets up projectors, screens, video walls, mics, lighting and speakers. He has assisted with setting up speaker arrays and rigging them up to be safely lifted and secure. He has experience working on man lifts and working from heights. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards.  

Credentials: Avant Media Institute- Audio engineering Certification 04/2024  

Comments: Candidate is available to work any shift and is open to travel.  

Position: Low Voltage Helper  

Availability: ASAP 

Location: Pasadena 

Experience: 6 months’ experience as a Low Voltage Helper. 1 year of warehouse experience. 

Projects: Hospitals, Commercial buildings, Hotels 

Skills: Candidates can read and interpret blueprints and schematics, he can pull CAT5e/6 cabling, install support structures, and can terminate RJ45’s and keystone jacks, 8 pin connectors for nurse call system devices. He has experience installing emergency pull ropes, call stations, dome lighting, code blues, ESP devices, and remotes. He has experience pulling Fire Alarm wire, cutting out and installing 1900 boxes and installing fire alarm devices such as smokes, strobes, horns, pull stations. He has experience loading and unloading trucks. Sorting merchandise into designated areas. Using stand-up forklifts to safely shelve pallets onto storage racks. He can palletize merchandise and make ready for shipping. He has experience operating Stand-up forklifts, electric pallet jacks. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards. 

Comments: Candidate is available to work any shift and is open to travel. 

Position: Low Voltage Helper   

Availability: ASAP 

Location: East Houston 

Experience: 3 months Voice/Data helper 2 years General Labor experience  

Projects: Industrial plants, warehouses, commercial building. 

Skills: Candidate can read blueprints and install support structures, he can pull CAT6 cabling and terminate RJ45’s. He can route and drop cables to designated locations according to print, assisted with MDF/IDF closet build outs. He has experience loading and unloading job site materials and tools needed to complete assigned tasks. He can operate high pressure tools to clean and decontaminate tanks, vessels, towers and other chemical storage areas. He can also maintain the work area clean and organized, and ensure all contaminated materials are properly disposed of in designated disposal units. He has experience using basic hand tools and power tools such as drills, grinders, high-capacity pressure washers. In addition, the candidate has successfully completed our 8-hour Entry level training class that covers topics such as: Construction safety, ladder safety, wire pulling techniques for Voice/Data and Fire Alarm. It covers basic knowledge of EIA/TIA and NFPA standards. 

Credentials: OHSA 10  

Comments: Candidate is available to work any shift and is open to travel. 

Job Title: Low Voltage Installer  

Availability: 1 week 

Location: Spring, TX 

Experience: One year of experience as a Low Voltage Installer. 

Projects:  K-12 schools, office spaces, Commercial buildings Hospitals, Industrial plants  

Skills:  Candidate can read and interpret blueprints, establish cable pathways, install support structures, pull Cat 6 and fiber optic cabling, he can terminate RJ45’s and keystone jacks. He can route and drop cables to final locations according to blueprints and can assist with MDF/IDF closet build outs. He can assist with dressing, routing and terminating cables to patch panels and test cables with fluke tester. He has experience mounting TV displays, installing projectors and screens, and speakers. He can install motions, door contacts, card readers and mag locks and IP based cameras. He has experience installing code blues, remotes, and pull cords in bathrooms for nurse call systems. In addition, he can pull cabling and install devices for industrial plant automation systems. 

Credentials: OSHA10, Lift and boom lift certified  

Comments: Candidate is open to working any shift and is open to travel. 

Job Title: VD Lead Technician
Availability: Immediate
Location: Pflugerville

Experience: This candidate has ten years of experience in the installation of voice/data. He’s also done the installation for audio/video and security/access control systems, with a background in running, labeling, and terminating Coax, Cat5e, Cat6a, and Fiber. He has led teams of up to 10 technicians on a variety of projects.

Projects: Audio/Visual installations, Voice/Data cabling, Security/Access Control systems, Closet buildouts, TV/projector/speaker mounting, Testing and Termination

Skills: Coax, Cat5e, Cat6a and Fiber terminations, Closet buildouts, Soldering, Mounting TVs/projectors/screens, Leading teams, Testing, Troubleshooting

Credentials: OSHA 10 Certification, own Tools, PPE

Comments: The candidate is available to start immediately and brings strong technical skills, leadership experience, and hands-on expertise in various installation projects within schools, hospitals, airports, and office spaces.

Job Title: Low Voltage Technician 

Availability: Immediate 

Location: Leander 

Experience: Over 2 years of experience in residential low-voltage installations, including structured cabling, AV systems, and security device setup. 

Projects: Installation of Cat 6 and Coax cables, security devices such as cameras, contacts, chimes, and glass breaks, AV systems including speakers, TVs, brackets, racks, and Control 4 setups, Prosource-certified installations, troubleshooting with two-way toners. 

Skills: Structured cabling (Cat 6, Coax), security device installation (cameras, chimes, glass breaks), AV systems setup (speakers, TVs, Control 4), troubleshooting with tools like two-way toners, Prosource-certified installation processes. 

Credentials: Prosource Certification 

Comments: The candidate demonstrates eagerness and commitment to advancing in the low-voltage industry. With a strong background in residential installations and technical troubleshooting, he is recommended for training to further develop his expertise for more diverse project scopes. 

Job Title: Network Technician / Structured Cabling Specialist
Availability: Immediate
Location: South Austin, TX
Experience: Over 10 years of experience in network installation and IT, specializing in structured cabling. Extensive background in running, terminating, and testing Cat 5, Cat 6, and fiber optic cables. Skilled in installing cabinets, patch panels, and security cameras, as well as troubleshooting and maintaining network infrastructure. Experience includes 8 years with a major Kenyan hospital and over 4 years with a telecommunications company.
Projects: Network and cabling for healthcare facilities, telecommunications infrastructure projects, installation of security camera systems
Skills: Cat 5/Cat 6 and fiber cable installation, wire termination and testing, minimal fusion splicing, cabinet and patch panel installation, security camera setup (HikVision), troubleshooting network issues, cable dressing and labeling
Comments: The candidate has a solid technical foundation in both structured cabling and IT networking. His practical experience in installing and maintaining complex systems, combined with his positive attitude and eagerness to work, make him a strong candidate for network and cabling roles. He is ready to obtain the necessary tools and gear to start immediately.

Job Title: Security/Access Control Technician 
Availability: Immediate 
Location: South Austin 

Experience: This candidate has three years of experience as a security technician, specializing in the installation and maintenance of security systems and cabling. 

Projects: Installation of Coax, Cat5e, and Cat6 cabling; installing cameras, motion detectors, keypads, card readers, strikes, crash bars, and security panels; dressing, terminating, and testing closets. 

Skills: Coax, Cat5e, Cat6 cabling; installing and configuring cameras, access control devices (motion detectors, keypads, card readers); closet termination and testing. 

Comments: This candidate seeking a long-term position and is available to start immediately. He brings a solid background in security system installations and is eager for stable employment opportunities. 

Job Title: Security and Access Control Lead Technician / Foreman
Availability: Immediate
Location: Central Austin
Experience: 7 years specializing in security and access control systems, with experience as a Lead Technician and Foreman. Extensive background in the installation, configuration, and maintenance of security devices and access control systems. Additionally, 12 years of experience in telecommunications, installing internet and phone systems for both residential and commercial clients. Expertise includes running, splicing, terminating, and testing cabling for complex security systems.
Projects: Large apartment complexes, Facebook, Google, hotels, high-rise buildings, schools
Skills: Installation of access control and security devices (card readers, mag locks, IP cameras, motion sensors, panic buttons), programming and troubleshooting of IP cameras, telecommunications installations, wire splicing and termination, service calls, system configuration (Bosch, HikVision, Reba, Butterfly, Linear, Software House), team leadership, project management
Credentials: OSHA 10, OSHA 30, Linel S2 Certification, DMP Certification, expired Security License (willing to renew)
Comments: The candidate is a seasoned professional in security and access control, with a strong technical skill set and leadership experience. He has demonstrated expertise in managing projects from start to finish, including large-scale commercial installations. His motivation to continue learning and growing in the field, combined with his readiness to start immediately, makes him an asset for any security-focused role.

Job Title: V/D Lead Technician
Availability: Immediate
Location: Hutto

Experience: This candidate has 7 years of experience in the voice/data cabling and security industry, including roles as a lead technician. His background includes managing crews, cabling installations, and performing both data and security projects across various locations in the U.S.

Projects: Camera installations, cabling and network systems for retail stores, rack & stack installations in behavioral hospitals, LAN remediation, fiber optic installations, closet buildouts, subcontracted cabling jobs, estimates, and project management for small cabling business.

Skills: Copper and fiber optic cabling, cat5e, cat6, 18/2, OS2, OS3, OS4, fiber splicing (including fusion), troubleshooting fiber, closet buildouts, cable management (ladder trays, cable trays), rack & stack, AP mounting, Fluke tester usage, network system updates, access control systems, installation and maintenance of security systems, door contacts and door readers, leading crews up to 8 technicians.

Credentials: OSHA 10

Comments: This candidate has a proven track record of progressing to lead roles, managing teams, and completing complex projects in both data cabling and security installations. He is eager to take on new challenges and bring his extensive field experience to a lead technician position.

Job Title: Low Voltage Technician
Availability: Immediately
Location:Austin

Experience: 5 years of experience in low-voltage installations, fiber optics, and structured cabling, with skills in deploying network systems, security camera setups, and switch configuration.

Projects: Pulling twisted pair, coaxial, Cat5, Cat6, single- and multi-mode fiber; fiber optic splicing and installation; camera setup and troubleshooting; configuring Cisco switches, VLAN assignments, and port security for security camera systems.

Skills: Twisted pair, coax, Cat5, Cat6, fiber installation; Cat5e/Cat6 and fiber termination; fiber splicing; fiber optic system repair and maintenance; security camera setup, troubleshooting, and replacement; configuring Cisco switches, VLANs, port security.

Comments: Candidate possesses practical, hands-on expertise in low-voltage systems and fiber optics installation and repair. This candidate is skilled in fiber optics and structured cabling and is motivated to re-enter the trade industry.

Position: Voice and Data Lead Technician 
Availability: Available to start ASAP 
Location: Spring, TX 
Experience: Over 5 years of experience in voice and data projects, fiber optic installations. 

Projects: Commercial buildings and office spaces, K-12 schools, large retail store. 

Skills: Has led teams of 5 to 10 techs on Voice and Data and OSP fiber projects. He can plan out day-to-day tasks, provide project updates and has a military background with experience in radio communications. He can read and interpret blueprints, establish cable pathways, install support structures, pull CAT6 cabling and fiber optic wiring. Terminate RJ45’s and keystone jacks, fiber quick connects and fusion splice fiber optic cabling. He has experience building out MDF and IDF closet buildouts, dressing, labeling, and terminating cables to patch panels. He can test copper and fiber optic cabling using Fluke tester and can install WAP’s, and antennas to extend signal ranges.  

Credentials: Certified Fiber Optic Technician, Military Ordnance and Radio Communication certification, Welding certifications from Lone Star College and Tulsa Welding School 

Comments: The candidate is a retired military veteran with extensive experience in fiber optics and voice/data systems. Open to travel and flexible with work hours. He is actively seeking full-time employment that offers long-term growth and career advancement opportunities. 

Name: Ahmad Hakimi 

Availability: Immediate 

Location: Austin 

Experience: Six years of experience in low voltage work, including structured cabling, fiber optics splicing and installation, security camera installation, and network switch configuration. 

Projects: Pulling twisted pair, coax, Cat5, Cat6, single-mode and multi-mode fiber; terminating Cat5e, Cat6, and fiber optics; splicing fiber and maintaining fiber optic systems; installing and troubleshooting security cameras; configuring and deploying Cisco switches with VLANs and port security. 

Skills: Twisted pair and fiber pulling, Cat5e/Cat6 termination, fiber splicing, troubleshooting fiber optic systems, security camera installation and troubleshooting, Cisco switch configuration, VLAN setup, port security, assigning devices to VLANs. 

Comments: This candidate has a skills in fiber optics, network configuration, and security camera systems, making him a strong asset for complex technical environments. 

Job Title: Voice/Data Installer  
Availability: ASAP 
Location: Baytown, TX 
Experience: One year of experience as a voice data installer. 
Projects: K-12 schools, office spaces, commercial buildings. 
Skills: Candidate has experience working on rehab and new construction projects. The candidate can work in a team setting and work independently. He can read and interpret blueprints, install support structures, pull CAT6 and fiber optic cabling, he can terminate keystone jacks and RJ45’5. He can route and drop cables to their final location according to blueprints. He can assist with MDF/IDF closet buildouts, he can assist with dressing and terminating cables to patch panels, and he can test cables using a fluke tester. 
Comments: Candidate is open to working any shift and is fully vaccinated.